Modem problem - Help - Printable Version +- CDIH (https://www.cdih.net/cdih) +-- Forum: Techie Geek Forums (https://www.cdih.net/cdih/forumdisplay.php?fid=5) +--- Forum: Über Geek Zone (https://www.cdih.net/cdih/forumdisplay.php?fid=13) +--- Thread: Modem problem - Help (/showthread.php?tid=1042) |
- HedCold - 03-31-2002 my modem isn't working for some reason. the computer initializes it but when it goes to dial it doesn't pick up the dial tone. there is definitly a working phone line because i put a phone on it to test it. i already tried installing the drivers over and over again and that didn't work i also tried setting it up for different com ports but that didn't work, its supposed to be working on com3 any other suggestions besides just getting a new modem? - AdolescentMasturbator - 03-31-2002 What kind of modem is it? - Jack - 03-31-2002 Usually if the computer will recognize it and it still won't get a dial tone it is a bad modem. Notice how I said usually though. It is not always the case but is the norm. The best way to find out is take the modem to a friends computer and put it in and see if it works. Otherwise just buy a new one. You can pick up a nice little lucent winmodem at any CompUSA for about 30 bucks. - AdolescentMasturbator - 03-31-2002 Avoid winmodems like the plague get a hardware modem they are way better. - HedCold - 04-01-2002 whats a winmodem? - AdolescentMasturbator - 04-01-2002 A winmodem is a modem that is software-based and it just isn't as efficent. Hardware modems are the way to go. - HedCold - 04-03-2002 Quote:What kind of modem is it?its a BCM v.90 56k it came with my comp - AdolescentMasturbator - 04-03-2002 Just get a decent hardware modem. - Bartman - 04-04-2002 am...ur local computer expert - Goatweed - 04-05-2002 Also, if you haven't already tried this, move the modem to a different PCI slot (assuming you have a free one to move it to). Sometimes the COM settings get fucked and you have to reseat the card in a different slot. If that doesn't work I would uninstall it from your machine via the control panel, go buy a good hardware based one and install it. You should be good to go after that. But try swapping it first, don't spend money if you don't have to. |